caption
caption
caption
caption
caption
caption

#610

Thermal-Grip®

Brick Tie Washer

  • Click For Available Resources

  • Compatible Wall Systems

    The Pos-I-Tie® KeyBolt is compatible with continuous insulation systems (alphabetic order):

     

    • Atlas Roofing Corp – Atlas Wall CI Insulation
    • Dow Building Solutions – Styrofoam™ Cavitymate™ Thermax™
    • Firestone Building Products – Enverge™ CI Wall Insulation
    • Hunter Panels – Hunter XCi
    • IKO Industries – IKO Enerfoil Insulation
    • Owens Corning – Foamular®
    • Rmax® – ECOMAX CI Thermasheath®-3

     

    *Check with insulation manufacturer for exact spacing requirements.

Insulation manufacturers recommend the use of over-sized washers to prevent wind blow-off during construction.

 

These are typically installed 12" o.c. around the perimeter, and 16" o.c. througout the sheet.*

 

Using the Thermal-Grip® over-sized washer with the Original Pos-I-Tie® Veneer Anchoring System:

  • Saves time & money
  • Reduces the number of overall penetrations to the insulation
  • Reduces the thermal bridging from the cavity to the backup.

 

For More Insulation Fasteners, Click HERE

Other

Insulation

Fasteners

Plasti-Grip® Ci Prong Washer

For rigid insulation not acting as the air barrier.

  • UV inhibitors
  • 1-3/4" diameter flexible design
  • Continuous Insulation (Ci) or EIFS (PM)

Plasti-Grip® PBLP2 Washer

For attaching EIFS systems.

  • 2" diameter for polymer based (PB) EIFS
  • System manufacturer approved
  • Also available with pre-spotting prong for EASY on-the-wall screw assembly.

Plasti-Grip® PMF Anchor

For attaching rigid insulation to concrete/block substrates

  • Rigid insulation to masonry
  • Solid plastic design
  • No thermal-bridging
  • Easy to install. Pre-drill and tap in with a hammer.
  • No adhesives required

Grip-Plate® Lath  & Plaster Washer

For attaching EIFS systems.

  • Galvanized steel for corrosion resistance
  • Keyholes for base coat bonding

Plasti-Grip® CBW Washer

For attaching building wrap

Submitting Form...

The server encountered an error.

Form received.

QUICK LINKS

FOLLOW US

Heckmann Building Products