Strap Anchors: Typical dimensions are 1” (25.4mm) to 2” (51 mm) wide x 16 gage to 3/8” (9.5 mm) thick x length required.
Corrugated Anchors: Maximum steel thickness is 3/16” (4.76 mm), 1/8” (3.17 mm) for stainless steel.
Holes: Specify center spacing from designated end. Holes are typically 1/16” (1.58 mm) larger than the diameter of the dowel or fastener.
Twists: Twist is 1-3/4” (44.45 mm) long. Specify the length from the end of the anchor to the start of the twist. Twist is not available on steel larger than 1/4” (6.35 mm) x 1” (25.4 mm), 3/16” (4.76 mm) x 1-1/2” (38 mm) or Stainless Steel larger than 3/16” (4.76 mm) x 1” (25.4 mm) or 1/8” (3.17 mm) x 1-1/2” (38 mm).
Split-Bends: Recommend minimum of 1-1/4” (32 mm) width and minimum 1/2” (12.7 mm) i.d. split-bend length.
Anchor Rods and Anchor Bolts: Continuous or partially threaded rods are available with UNC (course) threads from 6-32 to 2” (51 mm) diameter, and in lengths up to 144” (3.66 m). Stone Anchor Engineering Services are available in certain states through Heckmann for a fee.
For More information on Stone Anchor Engineering, please click HERE. |
