Heckmann Building Products Inc.
1501
N. 31st Avenue - Melrose Park, IL 60160 USA
800-621-4140 Fax 708-865-2640
Stabilizing Anchors Specifications
*************************************************
For Systems with Dovetail Slots as backup, also see Dovetail
Specifications page.
For Systems with Channel Slots as backup, also see Channel
Slot Specifications page.
**************************************************
SECTION 04085
MASONRY ANCHORS AND ACCESSORIES
PART 1 GENERAL
1.1 SECTION INCLUDES
*************************************************
NOTE: Delete items below not required for project.
*************************************************
A. Masonry veneer anchors and ties.
B. Stone veneer anchors and ties.
C. Masonry accessories.
1.2 RELATED SECTIONS
A. Section 04810 - Unit Masonry Assemblies.
B. Section 04851 - Cut Stone Veneer.
C. Section 04852 - Stone Masonry Veneer.
1.3 REFERENCES
**************************************************
NOTE: Delete references from the list below that are not actually required by
the text of the edited section.
**************************************************
A. ASCE/ACI 530.1 Specifications for Masonry Structures; 1995.
B. ASTM A 153/A 153M - Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware; 1998.
C. ASTM A 167 - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip; 1996.
D. ASTM A 240/A 240M - Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels; 1998b.
E. ASTM A 276 - Standard Specification for Stainless Steel Bars and Shapes; 1998b.
F. ASTM A 479/A 479M - Standard Specification for Stainless and Heat-Resisting Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels; 1997a.
G. ASTM A 580/A 580M - Standard Specification for Stainless Steel Wire; 1998.
H. ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process; 1998.
I. ASTM B 633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel; (Reapproved 1994).1.4 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Manufacturer's data on each type of product furnished.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer:
Heckmann Building Products Inc.,
1501 N. 31st Avenue
Melrose Park, IL 60160.
Tel: (708) 865-2403 Fax: 708-865-2640
Email: Heckmann@worldnet.att.net.
Website: www.heckmannbuildingprods.com.
***********************************************
NOTE: Delete paragraph below; coordinate with Division 1 requirements.
***********************************************
B. Requests for substitutions will be considered in accordance with provisions of Section 01600.
C. Substitutions: Not permitted.
2.2 APPLICATIONS
A. Provide anchoring systems that comply with ACI 530.1/ASCE 6/TMS 602.
*********************************************
Note: Select one of the following 3 combinations of materials: all stainless
steel, all hot-dip galvanized, or hot-dip galvanized except for items completely
embedded in mortar. Delete the inappropriate choices.
*********************************************
B. Material for Anchors and Ties in Exterior Walls: Stainless steel.
C. Material for Anchors and Ties in Exterior Walls: Hot-dip galvanized.
D. Material for Anchors and Ties Exposed to Air in Exterior Walls: Hot-dip galvanized.
E. Material for Ties Completely Embedded in Mortar Joints: Mill galvanized.
2.3 MATERIALS
A. Steel Types
1. Stainless Steel: Type 304.
A. Sheet Metal: ASTM A 167 or ASTM A 240/A 240M.
B. Wire: ASTM A 580/A 580M.
C. Bars: ASTM A 479/A 479M, annealed and ground.
D. Plates, Bars, and Shapes: ASTM A 167 or ASTM A 276.
2. Hot-Dip Galvanized Steel: Hot-dip galvanized after fabrication in accordance with ASTM A 153/A 153M, Class B-2.
B. Products
1. Masonry Wall Stabilizing Anchors: Anchoring top of wall to structure while allowing vertical deflection.
A. Type: No. 419 Pin Type 12 gage (2.6 mm) plate with 3/8 inch (10 mm) diameter pin; plate anchored to structure overhead, pin sliding in No. 421 Plastic Tube embedded in mortar at top of wall.
1. Material: Hot-dip galvanized.
2. Material: Stainless steel.
B. Type: No. 420 Cap 12 gage (2.6 mm) channel cap; attached to structure overhead.
1. Material: Hot-dip galvanized.
2. Material: Stainless steel.
C. Type: No. 138-R Channel Slot Threaded Rod Anchor used with a [#130 Welded Channel Slot][#133 Continuous Welded Channel Slot] on a Structural Beam. Channel Slot Anchor 12 gage (2.6 mm) with a welded 3/8 inch (10 mm) threaded rod [length] from channel, pin sliding in No. 421 Plastic Tube embedded in mortar at top of wall.
1. Material: Hot-dip galvanized.
2. Material: Stainless steel.
D. Type: No. 138 Channel Slot Flat Anchor used with a [#130 Welded Channel Slot][#133 Continuous Welded Channel Slot] on a Structural Beam. Channel Slot Anchor 12 gage (2.6 mm) x 1-1/4 inch ( mm) wide x[length] from channel, sliding in No. 422 Plastic Rectangle Tube embedded in mortar at top of wall.
1. Material: Hot-dip galvanized.
2. Material: Stainless steel.
E. Type: No. 121 Dovetail Threaded Rod Anchor used with a No. 100 Dovetail Slot built in to Top Slab. Dovetail Anchor 12 gage (2.6 mm) with a welded 3/8 inch (10 mm) threaded rod [length] from face of Top Slab, pin sliding in No. 421 Plastic Tube embedded in mortar at top of wall.
1. Material: Hot-dip galvanized.
2. Material: Stainless steel.
F. Type: No. 109 Dovetail Flat Anchor used with a No. 100 Dovetail Slot built in to Top Slab. Dovetail Anchor 12 gage (2.6 mm) x 1 inch (25 mm) wide x [length] from face of Top Slab, sliding in No. 421 Plastic Tube embedded in mortar at top of wall.
A. Material: Hot-dip galvanized.
B. Material: Stainless steel.
PART 3 EXECUTION
3.1 INSTALLATION
A. Install as specified in applicable masonry section(s) and in accordance with manufacturer's instructions.
END OF SECTION
© Copyright 1999 Heckmann Building Products Inc.