Heckmann Building Products Inc.
1501
N. 31st Avenue - Melrose Park, IL 60160 USA
800-621-4140 Fax 708-865-2640
Flashing Specifications
SECTION 04085
MASONRY ANCHORS AND ACCESSORIES
PART 1 GENERAL
1.1 SECTION INCLUDES
********************************************
NOTE: Delete items below not required for project.
*********************************************
A. Masonry veneer anchors and ties.
B. Stone veneer anchors and ties.
C. Masonry accessories.
1.2 RELATED SECTIONS
A. Section 04810 - Unit Masonry Assemblies.
B. Section 04851 - Cut Stone Veneer.
C. Section 04852 - Stone Masonry Veneer.
1.3 REFERENCES
*********************************************
NOTE: Delete references from the list below that are not actually required by
the text of the edited section.
**********************************************
A. ASCE/ACI 530.1 – Specifications for Masonry Structures; 1995.
B. ASTM A 153/A 153M - Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware; 1998.
C. ASTM A 167 - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip; 1996.
D. ASTM A 240/A 240M - Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels; 1998b.
E. ASTM A 276 - Standard Specification for Stainless Steel Bars and Shapes; 1998b.
F. ASTM A 479/A 479M - Standard Specification for Stainless and Heat-Resisting Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels; 1997a.
G. ASTM A 580/A 580M - Standard Specification for Stainless Steel Wire; 1998.
H. ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process; 1998.
I. ASTM B 633 – Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel; (Reapproved 1994).1.4 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Manufacturer's data on each type of product furnished.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer:
Heckmann Building Products Inc.,
1501 N. 31st Avenue
Melrose Park, IL 60160.
Tel: (708) 865-2403 Fax: 708-865-2640
Email: info@heckmannanchors.com.
Website: www.heckmannanchors.com.
*********************************************
NOTE: Delete paragraph below; coordinate with Division 1 requirements.
**********************************************
B. Requests for substitutions will be considered in accordance with provisions of Section 01600.
C. Substitutions: Not permitted.
2.2 APPLICATIONS
A. Provide anchoring systems that comply with ACI 530.1/ASCE 6/TMS 602.
2.3 MATERIALS
A. Stainless Steel: Type 304.
1. Sheet Metal: ASTM A 167 or ASTM A 240/A 240M.
B. Mill Galvanized Steel:
1. Sheet Metal: ASTM A 653/A 653M, G60 coating.
2. Wire: ASTM A 641, regular coating; minimum 3/16 inch (4.76 mm) diameter.
C. Copper: ASTM B 370 Soft Temper; 16 oz and 20 oz.
D: Steel Sheet Metal Flashings:
1005 L-FLASHING
[Leg dimension] x [Leg dimension] x [length]1008 L-FLASHING WITH DRIP
[Leg dimension] x [Leg dimension] x [drip dimension] x [length]1009 U-FLASHING
[Leg dimension] x [Leg dimension] x [Leg dimension] x [length]1010 Z-FLASHING WITH DRIP
[Leg dimension] x [Leg dimension] x [Leg dimension] x [drip dimension] x [length]1011 ACUTE BEND FLASHING
[Leg dimension] x [Leg dimension] x [length]1012 OBTUSE FLASHING
[Leg dimension] x [Leg dimension] x [length]1017 HOOK-ON FLASHING W/DRIP
[Hook Dimension] x [Leg dimension] x [Leg dimension] x [drip dimension] x [length]1020 HOOK-ON Z-FLASHING W/DRIP
[Hook Dimension] x [Leg dimension] x [Leg dimension] x [Leg dimension] x [drip dimension] x [length]1022 Z-FLASHING W/DRIP
[Leg dimension] x [Leg dimension] x [Leg dimension] x [drip dimension] x [length]1024 HOOK-ON Z-FLASHING W/DRIP
[Hook Dimension] x [Leg dimension] x [Leg dimension] x [Leg dimension] x [drip dimension] x [length]1052 ANGLED FLASHING
[Leg dimension] x [Leg dimension] x [drip dimension] x [length]1053 CRIMPED U-FLASHING
[Hook Dimension] x [Leg dimension] x [Leg dimension] x [Leg dimension] x [length]1054 L-FLASHING W/DRIP
[Leg dimension] x [Leg dimension] x [drip dimension] x [length]1055 SPECIAL FLASHING
[Leg dimension] x [Leg dimension] x [Leg dimension] x [Leg dimension] x [drip dimension] x [length]1056 SPECIAL FLASHING
Termination Bar
[Leg dimension] x [Leg dimension] x [Leg dimension] x [length]T-BAR
1/8 inch (3.175 mm) thick x 1-1/4 inch (32 mm) wide x [length] with [diameter] holes [length] on center.
PART 3 EXECUTION
3.1 INSTALLATION
A. Install as specified in applicable masonry section(s) and in accordance with manufacturer's instructions.
END OF SECTION
|
Home •
Products •
Specifications •
Submittals •
CAD Details •
Test Data •
PDF Files
Catalog # Index • M.S.D.S. • Credit App. • Links • Trades Shows • Contact • History |
© Copyright 1999 Heckmann Building Products Inc.