|
These
anchors are used to resist lateral loads at the top
of masonry walls. They allow vertical deflection of
the slab above while compressive loads are not transferred
to the masonry wall below. The rods are 3/8”
diameter (10mm) x 6” (150 mm) long and the flat
anchors are 12 gage. A plastic tube is imbedded in
the mortar to prevent the rod from bonding with the
mortar. Available in Hotdip Galvanized or Stainless
Steel. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
Click
HERE
for Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No.
421 Plastic Tube:
For
use with Rod Anchors extending into masonry
wall. Comes with compressible filler. Product Submittal Sheet PDF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No.
422 Plastic Rectangle Tube: For
use with Flat Anchors extending into masonry
wall. Comes with compressible filler. |
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
No.
100 Dovetail Anchor Slot:
Can
be imbedded in the top beam slab and the No.
121 Threaded Rod Anchor can be used with the
No. 421 Tube.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No.
130 Channel Slots:
Can
be welded to a Structural Beam and No. 138 Channel
Slot Flat Anchors can be used with No. 422 Plastic
Rectangle Tubes. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
