No.
355 Spring Loaded Dowels:
Spring
loaded dowels are used to anchor adjacent
stone panels to each other. The dowel
is inserted spring-end first into a drilled
hole in the stone. The dowel is compressed
and held in place by a flat piece of steel.
The
depth of the hole in the second stone
should be drilled half the length of the
dowel. When the panels are aligned, the
flat piece of steel is removed allowing
the dowel to spring back into the second
stone.
Furnished in Stainless Steel in dowel
diameters of 3/8" (9.5 mm), 1/2"
(12.7 mm), 5/8" (15.9 mm), or 3/4"
(19 mm). To order, specify the length
and diameter of dowel, and the overall
length. The pins are shaved 1/2"
(12.7 mm) for placement of the spring.
Product
Submittal Sheet html
Product Submittal
Sheet PDF
|
