Flashing Reglets
Reglets are the most reliable way to terminate roofing, waterproofing, and flashing in concrete walls. Use at parapet walls and above shelf angles, lintels and ledges. Standard length is 10 ft. (3.048 m). Specify type, size, and material. When specified, Reglets can be filled with foam or taped to keep wet concrete from entering.
REGLETS

Strip-Out Reglets: No. 230 Standard, No. 233 Medium, No. 232 Large:

Reglets are removed after concrete has hardened so that roofing and flashing can be sealed directly to concrete. Use 26 gage Mill Galvanized Steel for strip-out reglets.

Stay-Put Reglets: No. 234 Small, No. 231 Standard:

1/4" (6.35 mm) wide flanges anchor into concrete and resist water penetration behind Reglet. Available in 26 gage Mill Galvanized or Stainless Steel.

No. 230 Product Information: Product Submittal Sheet html
Product Submittal Sheet PDF
Download 2-D Cad File

No. 231 Product Information:
Product Submittal Sheet html
Product Submittal Shet PDF
Download 2-D Cad File

No. 233 Product Information:
Product Submittal Sheet html
Product Submittal Sheet PDF

No. 234 Product Information:
Product Submittal Sheet html
Product Submittal Sheet PDF
Installation:

- Nail to inside face of concrete   forms.

- Use double-headed nails with
  Stay-Put Reglets to resist damage   when forms are stripped.

- Roofing or flashing is typically   secured in Reglets with lead   wedges, resilient rod stock, or   sealants; follow instructions of   roofing or flashing manufacturer.
Cat. No.
  
Size
A
B
C
Strip-Out
Stay-Put
        
MO
234
Small
1/4"
1"
1-1/4"
     
6.3 mm
25 mm
32 mm
230
231
Standard
1/2"
1-1/2"
1-3/4"
     
12 mm
28 mm
44 mm
233
MO
Medium
3/4"
1-1/2"
1-3/4"
     
19 mm
38 mm
44 mm
232
MO
Large
1"
2-1/4"
2-3/4"
     
25 mm
57 mm
70 mm
REGLETS (MO = Made to Order)
Heckmann Home Page Back To Top