#103-C: Triangular Wire Veneer Anchor

12 gage anchor factory assembled to No. 316 Triangle Ties
(See page 8 for tie sizes). Screw hole is 5/16" (7.94 mm). Available in Stainless Steel, Hotdip Galvanized, or Mill Galvanized.

Product Submittal Sheet html
Product Submittal Sheet PDF

Download 2-D Cad File
Download 3-D Cad File

Specification MSWord
Specification PDF

Corrugated Brick Veneer Anchors

Standard Size for all three: 3-1/2" (89 mm) long x 1-1/4" (32 mm) wide x 16 gage with 1-1/2" (38 mm) bend. Hole is 5/16" (7.94 mm) dia. and Keyhole is 1/4" (6.35 mm) x 1" (25.4 mm) long to fit over a No. 12 dia. screw. Available Stainless Steel, Hotdip Galvanized, and Mill Galvanized.
Check for code acceptance in veneers.

#340: Series Custom Anchors

340 Series Strap Veneer Anchors are made to order in metal, gage, and dimensions you specify. They can be fabricated with any combination of bends, holes, slots, corrugations, dowels, or other features required for special types of masonry construction. Available in Stainless Steel, Hotdip Galvanized After Fabrication, Electro Galvanized After Fabrication, and Mill Galvanized. Check for code acceptance in veneers.