#262: Double Eye Rod Anchor

Eye Anchor: 2-3/4" (70 mm) and 4-3/4" (121 mm) long x 2-1/2" (64 mm) wide x 3/16" (4.76 mm) dia. wire. Available in Stainless, Hotdip Galvanized, or Mill Galvanized.

#263: Double Pintle Tie

Tie: 3-1/4" (83 mm), 4-3/4" (121 mm), and 5-1/2" (140 mm) long with 2-1/2"
(64 mm) bends. 3/16" (4.76 mm) dia. wire. (Maximum allowable vertical adjustment is 1-1/4” (31.75 mm). Available in Stainless, Hotdip Galvanized, or Mill Galvanized.

Product Submittal Sheet html
Product Submittal Sheet PDF

Specification #262 MSWord
Specification #262 PDF

Specification #263 MSWord
Specification #263 PDF

Product Submittal Sheet PDF

Specification MSWord
Specification PDF

#253: Rectangular Wire Tie (No Drip)

3/16” (4.76 mm) dia. wire 2” (51 mm) or 4” (102 mm) wide in lengths of 6” (152 mm), 8” (203 mm), 10” (254 mm), and 12” (305 mm). Available in Stainless, Hotdip Galvanized, or Mill Galvanized.

Product Submittal Sheet PDF

Specification MSWord
Specification PDF

Channel Slot Systems

Use #131 Built-In Channel Slot in backup block wall. Attach #133 Long Channel Slots to Block by grouting No. 135 Bent Anchors into the block core. Use #122, #123, #124, #125, #129, #134, or #362 for veneer wall.

Cleck HERE for Channel Slot Systems page.