Adjustable Anchors - Masonry to Concrete/CMU

No. 315-D Screw-On Anchor Plate:

12, 14, and 16 gage x 1-1/4" (32 mm) wide x 6" (152 mm) long.

Product Submittal Sheet html
Product Submittal Sheet PDF

Download 3-D Cad File

Specification MSWord
Specification PDF

*Shown with #316 Triangle Tie

No. 315-C Screw-On Anchor Straps:

12 gage x 3/4" (19.05 mm) wide x 9" (229 mm) long or 7/8" (22.2 mm) wide x 6-1/2" (165 mm) long with two 1/4" dia. holes for attachment to backup.


Product Submittal Sheet html
Product Submittal Sheet PDF

Download 2-D Cad File
Download 3-D Cad File

Specification MSWord
Specification PDF

*Shown with #314 Tie Clip

No. 213 Wire Veneer Anchor System:

14 Gage backplate made for no insulation, 1" (25 mm), 1-1/2" (38 mm) and 2" (51 mm) insulation in mill galvanized, hot dipped galvanized, and stainless steel.

Product Submittal Sheet html
Product Submittal Sheet PDF

Specification MSWord
Specification PDF

No. 282 Double Pintle Wire Tie:

3/16" dia. (4.76 mm) wire in 3-1/4" (83 mm), 4-1/4" (108 mm), and 5-1/4" (133 mm) lengths. Pintles are 2-1/2" (63.5 mm) long. Mill galvanized, hot dipped galvanized, and stainless steel.

Product Submittal Sheet html
Product Submittal Sheet PDF

No. 75 Pos-I-Tie®:

Tapcon® System. Easy to Install Barrel Screw System with wire ties. Used for attaching masonry to an existing wall. 2” (100 mm) hole is pre-drilled. Ties allow for vertical adjustment.

Click HERE for Pos-I-Tie® page.
Channel Slot System:

#133 Long Channel Slots or #132 Screw-On Channel Slots are attached to existing concrete walls with expansion anchors. Anchors are inserted into the slots which allow vertical adjustment for placement in masonry joints.

Click HERE for Channel Slot page.

Dovetail Anchoring System (Concrete Only):

Incorporates 10 ft (3.048 m) long slots that are cast into concrete. Anchors are inserted in slot which allows vertical adjustment for placement in masonry joints.

Click HERE for Dovetail page.

Heckmann Home Page Back To Top