|
Sheet
Metal Flashings 1000 Series:
Heckmann custom fabricates flashings from
Stainless Steel and Mill Galvanized in
11 gage to 26 gage, 16 oz. Copper, and
.032" (.8128 mm) Aluminum.
Flashing rolls, which can be cut at the
jobsite, are available in .010 and .015
Stainless Steel.
Shapes:
Shapes are made to customer's specifications
as to dimensions, degree of angle at bends,
gages, type of material and length. Special
shapes are available - just fax your drawing
to our estimating department. Shapes can
be made with 1/2" (12.7 mm) hems,
turned inside or outside, on long edges.
Lengths:
Flashings are usually furnished in 10
ft. (3.048 m) lengths.
Product Submittal Sheet
#1052 - html
NOTE:
Aluminum should not be used as a flashing
material in brick masonry construction. |
