#103: Dovetail Triangular Ties

12 gage anchor factory assembled to No. 316 Triangular Tie. Specify length of tie and type of steel. Dovetail anchor projects 3/8" (9.5 mm)

Product Submittal Sheet and test data - html
Product Submittal Sheet and test data - PDF

Download 3-D Cad File

Specification MSWord
Specification PDF

#104: Dovetail Partition Anchor

12" (305 mm) x 1-1/2" (38 mm) wide x 16 gage.

Product Submittal Sheet - html
Product Submittal Sheet - PDF

Download 3-D Cad File

Specification MSWord
Specification PDF

Quote Request

#106: Dovetail Corrugated Tie

3-1/2" (89 mm), 5-1/2" (140 mm), and 7-1/2" (190 mm) long x 1" (25mm) wide in 12 gage and 16 gage as standards.

Product Submittal Sheet - html
Product Submittal Sheet - PDF

Download 3-D Cad File

Product Test Data

Specification MSWord
Specification PDF

Quote Request

#107: Dovetail Horizontal Triangular Anchor:

1/8" (3.17 mm) thick anchor furnished loose with No. 316 Triangle Ties. Use with Slots installed Horizontally. Dovetail projects 5/16" (7.9 mm)

Download 3-D Cad File

Specification MSWord
Specification PDF

#109: Dovetail Flat Anchor

Made to Order for field bending, drilling, or welding on the job.

Product Submittal Sheet - html
Product Submittal Sheet - PDF

Download 3-D Cad File

Specification MSWord
Specification PDF

Quote Request

#110: Dovetail Furring Anchor

1-1/2" (38.1 mm) long x 16 gage. Use with thin masonry or tile veneers.

Download 3-D Cad File

Specification MSWord
Specification PDF

#115: Dovetail Bent Anchor

Length and Bend made to order. Use "inside" dimensions to specify length and bends. For stone and masonry block.

Product Submittal Sheet - html
Product Submittal Sheet - PDF

Download 3-D Cad File

Specification MSWord
Specification PDF

Quote Request

#117: Dovetail Split-Bend Anchor

Length and split bend made to order. Use "inside" dimensions to specify length and bends. Use to anchor upper and lower stones.

Product Submittal Sheet - html
Product Submittal Sheet - PDF

Download 3-D Cad File

Specification MSWord
Specification PDF

Quote Request

(#117-A Large Dovetail Split-Bend Anchor for use with #100-A Large Dovetail Slot)
Product Submittal Sheet - PDF

#118: Dovetail Pin Anchor

No. 155 Dowel Pin furnished loose or welded in place. Specify length to center of hole and size of pin. Hole is 1/16" (1.59 mm) greater than diameter of pin.

Product Submittal Sheet - html
Product Submittal Sheet - PDF

Download 3-D Cad File

Specification MSWord
Specification PDF

Quote Request

(#118-A Large Dovetail Split-Bend Anchor for use with #100-A Large Dovetail Slot)
Product Submittal Sheet - PDF

#121: Dovetail Threaded-Rod Anchor

Made to Order. Rod welded 1" (25 mm) to flat anchor. Specify diameter and lengths of flat anchor and threaded rod. Specify nut and washer if required.

Product Submittal Sheet - html
Product Submittal Sheet - PDF

Download 3-D Cad File

Specification MSWord
Specification PDF

#361: Dovetail Seismic Anchor

Made to Order. Tab holds masonry reinforcement or pencil rod.

Product Submittal Sheet - html
Product Submittal Sheet - PDF

#396: T-Type Groutless Dovetail Anchor

11gage thick x 3-1/4” wide with the Twist-On™ Dovetail Anchor on one end and with a 1-1/ 2" x 16" long Corrugated Anchor Bar factory-welded onto the other end.

Product Submittal Sheet - PDF