Vertical control joints allow for expansion and contraction of masonry walls while reducing the possibility of air and water penetration. They are used with standard sash block and other masonry wall materials.

Product Submittal Sheet - html
Product Submittal Sheet - PDF

No. 352-10 Rubber 48" long
& 352-15 Rubber:

32" long are manufactured from a high grade of synthetic rubber compound with durometer hardness of 80 shore A when tested in conformance with ASTM D-2240.

Property Nominal Value Test Method Tensile
Strength 1260 PSI ASTM D-412
Ultimate Elongation 360% ASTM D-412
Low Temp. Brittleness -62 deg. F ASTM D-746
Compression Set @ 77 F 30% ASTM D-395, Method B

Manufactured from PVC compound grade conforming to ASTM D-2287 - 554. They conform to a durometer hardness of 80 +- 5 shore A when tested in conformance with ASTM D-2240.

Property Nominal Value Test Method
Tensile Strength 1750 PSI ASTM D-638
Ultimate Elongation 300% ASTM D-638 Density 1.35 ASTM D-297

352-16 PVC Tee 32" long, 352-17 PVC 32" long, 352-12 48" long, 352-13 48" long, 352-18 32" long, & 352-19 32"long are manufactured from PVC compound grade conforming to ASTM D-2287 - 654.

They conform to a durometer hardness of 85 +- 5 shore A when tested in conformance with ASTM D-2240. Tensile Strength - ASTM D-638 352-16, 352-17, 352-18. & 352-19 - 2,000 PSI 352-12 & 352-13 - 1,750 PSI Ultimate Elongation for all per ASTM D-638 was 300%.

Elongation Density for all per ASTM D-297 was 1.39.

No. 350 Heavy Duty Control Joint Anchor:

Anchor is 12" (305 mm) long x 3" (76 mm) wide x 1/8" (3.17 mm) thick with 2" (51 mm) bend. Slot is 2" (51 mm) long x 1" (25.4 mm) wide. L-Rod is 6" (152 mm) long x 1/2" (12.7 mm) dia. Electro Galvanized steel with a 2" (51 mm) bend.

Product Submittal Sheet - PDF

Download 3-D Cad File

No. 351 Corrugated Control Joint Anchor:

6-1/4" (159 mm) overall length x 1" (25.4 mm) wide x 24 gage. V-Section is 1/4" (6.35 mm) wide x 1-3/4" (44.4 mm) deep.

Product Submittal Sheet - html
Product Submittal Sheet - PDF

Download 3-D Cad File

No. 353 Debinded Shear Anchor:

Allows for load transfer across control joints. Inhibits lateral movement. Bonds masonry walls. Available in Mill Galvanized, Hotdip Galvanized After Fabrication, and Stainless Steel.

Product Submittal Sheet - PDF