| Used
to attach structural members, veneers, or
equipment to concrete structures. Plates
and Angles can also be used to frame openings
in concrete walls or as shelf angles. Use
with precast or cast-in-place concrete.
Custom fabricated to your design requirements.
Specify catalog numbers, dimensions, slots,
holes, anchors and other requirements.
Materials
& Finishes: Plain, electro-galvanized,
hotdip galvanized, or stainless steel.
Options: Holes, slots, gussets, dowels and toe
bars. Optional nail holes are typically
3/16" (4.76 mm) diameter and allow
anchor plates to be fastened to inside
faces of forms. (Note: Punched holes are
more economical than drilled holes, but
punch diameter must be greater than or
equal to the thickness of steel.) |
