#315-C: Screw-On Anchor Straps

12 gage x 3/4" (19.05 mm) wide x 9" (229 mm) long or 7/8" (22.2 mm) wide x 6-1/2" (165 mm) long with two 1/4" dia. holes for attachment to backup.

Product Submittal html
Product Submittal Sheet PDF

Download 2-D CAD File
Download 3-D CAD File

Specification MSWord
Specification PDF

#315-D: Screw -On Anchor Plate

12, 14, and 16 gage x 1/4" (32 mm) wide x 6" (152 mm) long.

Product Submittal Sheet html
Product Submittal Sheet PDF

Download 3-D CAD File

Specification MSWord
Specification PDF

#317: Continuous Weld-On Anchor Rods

1/4" dia. (6.35 mm) x 8ft (2.44 m) with six 3/8" (9.53 mm) offsets provide 7-3/4" (197 mm) verticle adjustment and are spaced 16-1/4" (413 mm) o.c.

Product Submittal Sheet html
Product Submittal Sheet PDF

Download 2-D CAD File
Download 3-D CAD File

Specification MSWord
Specification PDF

#317-B: Continuous Weld-On Anchor Straps

12 gage x 1/2" (12.7 mm) wide. Same configuration as N0. 317.

Product Submittal Sheet html  
Product Submittal Sheet PDF   

Download 2-D CAD File 
Download 3-D CAD File  

#317-C: Continuous Screw-On Anchor Straps

12 gage x 1/2" (12.7 mm) wide. Same configuration as No. 317. 1/4" dia. (6.35 mm) holes are provided for attachment to backup.

Product Submittal Sheet html
Product Submittal Sheet PDF

Available in: Mill Galvanized, Hot-Dip Galvanized, and Stainless Steel

#314: Tie Clip

3/16" dia. (4.76 mm) wire 2" (51 mm) wide. Available in 3" (76 mm), 4" (102 mm), 5" (127 mm), and 6" (152 mm) lengths.

Product Submittal Sheet PDF

#316: Triangle Ties

3/16" dia. (4.76 mm) wire. Closed ends is 1" (25.4mm) wide. Standard lengths are 3" (76 mm), 4" (102 mm), 5" (127 mm), 7" (178 mm), 9" (229 mm), and 11" (279 mm).

Product Submittal Sheet html
Product Submittal Sheet PDF

Download 2-D CAD File
Download 3-D CAD File

Test Data (tested with No. 315 Weld-On AnchorRod)

Specification MSWord
Specification PDF

#318: Web Ties

3/16" dia (4.76 mm) wire 12" (305 mm) long.

Product Submittal Sheet html
Product Submittal Sheet PDF

Download 2-D Cad File
Download 3-D Cad File

Specification MSWord
Specification PDF

Size (Width)

2-3/8" (60 mm)

4" (102 mm)

6" (152 mm)

8" (203 mm)

10" (254 mm)

Nominal Wall Thickness

4" (102 mm)

6" (152 mm)

8" (203 mm)

10" (254 mm)

12" (305 mm)

#213: Wire Veneer Anchor System

14 Gage backplate made for no insulation, 1" (25 mm), 1-1/2" (38 mm) and 2" (51 mm) insulation in mill galvanized, hot dipped galvanized, and stainless steel.

Product Submittal Sheet html
Product Submittal Sheet PDF

Specification MSWord
Specification PDF

#282: Double Pintle Wire Tie

3/16" dia. (4.76 mm) wire in 3-1/4" (83 mm), 4-1/4" (108 mm), and
5-1/4" (133 mm) lengths. Pintles are 2-1/2" (63.5 mm) long. Mill galvanized, hot dipped galvanized, and stainless steel.

Product Submittal Sheet html
Product Submittal Sheet PDF

#320: Weld-On Clip

1" (25.4 mm) high x 1-1/4" (32 mm) wide x 14 gage with 3/16" (4.76 mm) offset for anchor, plain steel for welding and painting in shop or field.

Product Submittal Sheet PDF

#321: Corrugated L-Tie

3" (76 mm), 5" (127 mm), 7" (178 mm), or 9" (229 mm) lengths x 3/4" (19 mm) wide x 14 gage. Adjustment bend is 4" (102 mm) long.

Product Submittal Sheet PDF

Download 2-D Cad File
Download 3-D Cad File

#322: U-Type Tie

Made to order. Cannot be thicker than 14 gage or wider than 3/4" (19 mm).

Product Submittal Sheet PDF

Download 2-D Cad File
Download 3-D Cad File

#319: Tie Hold

Back plate system for protecting insulation when used with our popular 315-C Anchor Strap and 316 Triangle Tie. Specify steel type.

Download 3-D Cad File