95

HECKMANN BUILDING PRODUCTS INC.
1501 N. 31st Avenue
Melrose Park, IL 60160-2911
800-621-4140 and 708-865-2403
FAX: 708-865-2640

SUBMITTAL SHEET: #95 TONGUE & GROOVE JOINT and
#95-L L-TYPE TONGUE & GROOVE JOINT

Used as a form or screed for concrete floor slabs. Tongue and groove keyway transfers loads between adjoining slabs and helps maintain slab alignment.

Specify: Gage: 24, 22, 20, 18, or 16 gage.

Height: actual height of the steel joint 3-1/2" minimum to 16" maximum.

95-L Has a 1-1/2" (38.1 mm) leg.

Opening: Centered in joint. Opening dimension is 2" in joints 4" high or less and 3" in joints over 4" in height.

Steel Type: Usually ordered in Mill Galvanized but is available in Stainless Steel or 16 ounce Copper for corrosive environments and special conditions.

Optional Holes: Stake Pins - 24" o.c. starting 1-1/2" from ends (6 stake pins per 10 ft. section. Dowel Holes - 30" o.c. starting 15" from ends, enough for 4 dowels per 10 ft.. section. Specify 9/16" or 13/16" holes.

Heckmann Building Products Materials and Finishes:

Stainless Steel:
Sheet Metal Anchors and Ties: ASTM A 167 AISI Type 304.
Plate and Bent Bar Anchors: ASTM A 666 AISI Type 304.
Wire Ties and Anchors: ASTM A 580 AISI Type 304.
Hotdip Galvanized:
ASTM A 153 Class B-2: (1.50 oz/ft2) (0.46 kg/m2)
Mill Galvanized:
Sheet Metal Anchors and Ties: ASTM A 653 G60
Wire: ASTM A 641 (0.1 oz/ft2)
Plain Steel:
Sheet Metal Anchors and Ties: ASTM A 569, ASTM A 366.
Plates, Bars, and Shapes: ASTM A 123, ASTM A 36.
Wire: ASTM A 82, ASTM A 82-95a.

Heckmann Home Page