585

HECKMANN BUILDING PRODUCTS INC.
1501 N. 31st Avenue
Melrose Park, IL 60160-2911
800-621-4140 and 708-865-2403
FAX: 708-865-2640

SUBMITTAL SHEET: #585 JOIST PIN ANCHOR

Used to anchor joist to masonry wall.

Standard Sizes: 1/8" x 1" wide with 7/32" holes for nailing to top of joist. Fixed Pin is 3/8" diameter x 5" long and is centered 1" from the end of the anchor. Available in Plain and Mill Galvanized in the following lengths:

14" long with two holes

18" long with three holes spaced 3" o.c. starting 3/4" from end.

40" long with three holes spaced 16" o.c. starting 1" from end. This is used for anchoring three joists for to a parallel masonry wall.

Special sizes are available. Specify thickness (1/8" minimum recommended), width (1" minimum recommended), overall length, diameter and length of pin, location of pin in the anchor, and size and location of holes.

Heckmann Building Products Materials and Finishes:

Stainless Steel:
Sheet Metal Anchors and Ties: ASTM A 167 AISI Type 304.
Plate and Bent Bar Anchors: ASTM A 666 AISI Type 304.
Wire Ties and Anchors: ASTM A 580 AISI Type 304.
Hotdip Galvanized:
ASTM A 153 Class B-2: (1.50 oz/ft2) (0.46 kg/m2)
Mill Galvanized:
Sheet Metal Anchors and Ties: ASTM A 653 G60
Wire: ASTM A 641 (0.1 oz/ft2)
Plain Steel:
Sheet Metal Anchors and Ties: ASTM A 569, ASTM A 366.
Plates, Bars, and Shapes: ASTM A 123, ASTM A 36.
Wire: ASTM A 82, ASTM A 82-95a.
Firewall Anchors:
Rolled Strip Zinc Alloy 710.
(Firewall alloy 1/8” and 16 gage only)

Heckmann Home Page