Pin Stabilizing Wall Anchor (419)

#419 Pin Type Stabilizing Wall Anchors #421 Plastic Tubes 

Used to resist lateral loads at the top of a masonry wall. The 419 Pin Type is supplied with two holes for attachment to a concrete slab or can be welded to a structural beam. Typically manufactured from 12 gage steel 1 ½” x 3” plate with a 3/8” diameter x 6 ¾” long welded rod Hotdip Galvanized after Fabrication. Ultimate Shear Load = 450 lbs.

Note: $200 minimum total per order

Standards: Plate Thickness: 12 gage  1 ½” wide x 3” long Rod Diameter: 3/8” x 6 ¾” long Hot Dip Galvanized 

Plastic Tube is 5/8” od x 7-1/4” long with a compressible filler in the bottom.

Material Specifications 

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)  

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2) 

Plain Carbon Steel:  ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08 Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi