Mobile Nav Open Mobile Nav Close
340
340

Roll over image to zoom in

Corrugated L-Anchor (340)

Part Number: 340

Made to Order.

Used for attaching masonry to various backups. Bend can be attached to the backup wall by drilling a hole, welding or powder actuated tool

#340: Specify thickness, length, width, bend length and steel type.

Available in Stainless Steel, Hot Dip Galvanized, Mill Galvanized (up to 1/8"), Zinc Alloy 710 Firewall (1/8" and 16 gauge only)

Various combinations of bends holes and slots make up our #340 Series of custom masonry anchors for various anchoring requirements. Click on the links below for additional products.

340 Series Custom Masonry Anchors

340-A Corrugated L-Anchor with Hole

340-B Corrugated L-Anchor with Slot

341 L-Anchor With Hole

341-A L-Anchor with Two Holes

341-B – L-Anchor with Hole and Slot

342 L-Anchor with Slot

342-A L-Anchor with Hole and Slot

342-B L-Anchor with Two Slots

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. (AISI Type 316 available upon request)
Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2)
Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60 Wire: ASTM A 641 (0.1 oz/ ft2.)
Plain Carbon Steel: ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08
Firewall Anchors: Rolled Strip Zinc Alloy 710. (Firewall alloy 1/8” and 16 gage only)

#340 Corrugated L-Anchor

Custom Made: 

Used for attaching masonry to various backups. Bend can be attached to backup by drilling a hole, welding or powder actuated tool. Specify length, width, bend length, and steel type. 

Note: $400 minimum total per order

Material Specifications 

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request) 

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2) 

Mill Galvanized:  Sheet metal anchors and ties: ASTM A 653 G60 Wire: ASTM A 641 (0.1 oz/ ft2.)

Plain Carbon Steel:  ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08 Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi

Firewall Anchors: Rolled Strip Zinc Alloy 710. (Firewall alloy 1/8” and 16 gage only) 

Help from the Experts