HECKMANN BUILDING PRODUCTS INC.
1501 N. 31st Avenue
Melrose Park, IL 60160-2911
800-621-4140 and 708-865-2403
FAX: 708-865-2640
SUBMITTAL SHEET: #231 STAY-PUT FLASHING REGLET
The stay-put flashing reglet is the most reliable way to terminate roofing, waterproofing, and flashing in concrete walls. Use at parapet walls and above shelf angles, lintels, and ledges.
Standard Size: 26 gage 1" and 1/2" flanges with 1/4" lips for adhering to concrete. Opening is 1/2" x 1-3/4" deep at a 65 degree angle into the wall. (Actual depth from face of concrete is 1-1/2".) Standard length is 10 feet. Available in Stainless Steel or Mill Galvanized Steel. Supplied foam-filled to prevent concrete from entering the slot during the pour. (See product #234 Small Stay-Put Flashing Reglet for smaller slot size)
Installation: Nail to inside face of concrete forms. Use double-headed nails to resist damage when forms are stripped. Roofing or flashing is typically secured in reglet with lead wedges, resilient rod stock, or sealants.
 |
Heckmann Building Products Materials and Finishes: Stainless Steel:
|
© Copyright 2003 Heckmann Building Products Inc.