HECKMANN BUILDING PRODUCTS INC.
1501 N. 31st Avenue
Melrose Park, IL 60160-2911
800-621-4140 and 708-865-2403
FAX: 708-865-2640
SUBMITTAL SHEET: #217 WIRE-TYPE COLUMN ANCHOR
(Column Flanges Perpendicular to Wall)
STANDARD SIZES: Hook is 1/2" x 2-1/2".
90o Bend into masonry is 2". Lengths from inside of hook to
inside of masonry bend are 10", 12", 14", and 16". Available
in 1/4" diameter and 3/16" diameter wire. Mill Galvanized Steel or
Hotdip Galvanized After Fabrication Steel.
Custom lengths, hook sizes, and masonry bend lengths are available.
Stainless Steel, Plain Steel, and Electro Galvanized After Fabrication are also
available.
Anchor is used to tie Masonry to structural Steel where the
Structural Steel Column Flanges are Perpendicular to the wall. Used in pairs.
For compression loads the anchor must be welded to the column flange.
 |
Heckmann Building Products Materials and Finishes:
Stainless Steel:
Sheet Metal Anchors and Ties: ASTM A 167 AISI Type 304.
Plate and Bent Bar Anchors: ASTM A 666 AISI Type 304.
Wire Ties and Anchors: ASTM A 580 AISI Type 304.
Hotdip Galvanized:
ASTM A 153 Class B-2: (1.50 oz/ft2) (0.46 kg/m2)
Mill Galvanized:
Sheet Metal Anchors and Ties: ASTM A 653 G60
Wire: ASTM A 641 (0.1 oz/ft2)
Plain Steel:
Sheet Metal Anchors and Ties: ASTM A 569, ASTM A 366.
Plates, Bars, and Shapes: ASTM A 123, ASTM A 36.
Wire: ASTM A 82, ASTM A 82-95a.
|
Specification MSWord
Specification PDF
© Copyright 1999 Heckmann Building Products Inc.