HECKMANN BUILDING PRODUCTS INC.
1501 N. 31st Avenue
Melrose Park, IL 60160-2911
800-621-4140 and 708-865-2403
FAX: 708-865-2640

SUBMITTAL SHEET: #213 WIRE VENEER ANCHOR SYSTEM

Standard: 14 gage backplate made for no insulation, 1" insulation, 1 ½" insulation, and 2" insulation. Available in Mill Galvanized, Hotdip Galvanized After Fabrication, and Stainless Steel.

(Use #282 Double Pintle Wire Ties for Tie Section)

Backplates are attached directly to the backup system. Insulation is then placed above and below the wire tie tab. (Note: If ties are placed 16" on center, your insulation will have to be in 16" strips)

Heckmann Building Products Materials and Finishes: Stainless Steel: Sheet Metal Anchors and Ties: ASTM A 167 AISI Type 304. Plate and Bent Bar Anchors: ASTM A 666 AISI Type 304. Wire Ties and Anchors: ASTM A 580 AISI Type 304. Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ft2) (0.46 kg/m2) Mill Galvanized: Sheet Metal Anchors and Ties: ASTM A 653 G60 Wire: ASTM A 641 (0.1 oz/ft2) Plain Steel: Sheet Metal Anchors and Ties: ASTM A 569, ASTM A 366. Plates, Bars, and Shapes: ASTM A 123, ASTM A 36. Wire: ASTM A 82, ASTM A 82-95a.

Specification MSWord

Specification PDF

Heckmann Home Page

© Copyright 1999 Heckmann Building Products Inc.