Mobile Nav Open Mobile Nav Close
196
196

Roll over image to zoom in

Corrugated Notch Column Anchor (196)

Part Number: 196

The Corrugated Column Anchor is used to anchor masonry walls to structural steel beams where the column flanges are parallel to the masonry wall. 1” deep x 5/8” wide notch fits into steel beam for secure application. Order by piece. Anchors are reversible for left or right side use.

Also available to

Buy Online

Features and Benefits

Attaching masonry walls to structural steel beams.

Order by piece, anchor is reversible for left or right side use.

Standard size: 7” L x 2” W, 1/8” thick.

Standard corrugated section: 4-1/2”.

Standard notch: 5/8” x 1”, 1” from end of anchor.

Type 304 and Type 316 Stainless Steel, Zinc Alloy 710 (1/8" only) Firewall material.

Custom sizes available in 3/16", 1/8" and 12 gauge.

Materials/Finishes

Stainless steel

Rolled strip zinc alloy 710 firewall material

#196 Corrugated-Type Column Anchor 

Used to tie CMU wall back to a vertical steel column with the flanges parallel to the CMU wall. Anchors clip onto the left and right side of the flange and the corrugated section is embedded in the CMU mortar joint. Anchors are reversible for left or right side of flange. Standard Notch is 5/8” x 1”. 

Test of 5/8” x 1” notch to a steel column: Load increased to 6,150 lbs. The left bracket slot spread and cracked, causing it to slide off the holding fixture. The right bracket slot had a visible spread. Visible straightening was noted at the bend section around 1,500 to 2,000 lbs. 

Note: $400 minimum total per order

Standard and Special Orders Available

Material Specifications 

 Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. 

Wire ties and anchors: ASTM A 580 AISI Type 304 

(AISI Type 316 available upon request) 

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2) 

Mill Galvanized: Sheet metal anchors and ties: ASTM A 653 G60 

Wire: ASTM A 641 (0.1 oz/ ft2.) 

Plain Carbon Steel: ASTM A1008/A1008M 

Structural Steel ASTM A36/A36M-08 

Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi 

Firewall Anchors: Rolled Strip Zinc Alloy 710. 

(Firewall alloy 1/8” only) 

Help from the Experts