HECKMANN BUILDING PRODUCTS INC.
1501 N. 31st Avenue
Melrose Park, IL 60160-2911
800-621-4140 and 708-865-2403
FAX: 708-865-2640

SUBMITTAL SHEET: #152-S SPLIT-BEND STONE PIN ANCHOR

MADE TO ORDER:

Thickness of Strap: 1/4", 3/16", 1/8", 11 gage, 12 gage, & 16 gage.
Diameter of Pin: 1/4", 3/8", 1/2", 5/8"
Strap Width: 1-1/4" minimum recommended. (You should allow at least 1/4" of steel on each side of a pin).
Length: Specify length of strap to i.d. of bend and overall length of pin. (Pin is usually a minimum of 3" long)
Split-Bend Length: minimum 3/4" recommended (specify i.d. dimension)
Available in Stainless Steel, Hotdip Galvanized After Fabrication, Electro Galvanized After Fabrication, Mill galvanized (16ga - 11ga), or Plain Steel.
Specify Location of Pin from center of pin to end. 1/2" minimum of steel between end of anchor and start of hole is recommended.
Pin is usually welded in place.

Heckmann Building Products Materials and Finishes:

Stainless Steel:
Sheet Metal Anchors and Ties: ASTM A 167 AISI Type 304.
Plate and Bent Bar Anchors: ASTM A 666 AISI Type 304.
Wire Ties and Anchors: ASTM A 580 AISI Type 304.
Hotdip Galvanized:
ASTM A 153 Class B-2: (1.50 oz/ft2) (0.46 kg/m2)
Mill Galvanized:
Sheet Metal Anchors and Ties: ASTM A 653 G60
Wire: ASTM A 641 (0.1 oz/ft2)
Plain Steel:
Sheet Metal Anchors and Ties: ASTM A 569, ASTM A 366.
Plates, Bars, and Shapes: ASTM A 123, ASTM A 36.
Wire: ASTM A 82, ASTM A 82-95a.
Firewall Anchors:
Rolled Strip Zinc Alloy 710.
(Firewall alloy 1/8” and 16 gage only)

 Download 2-D Cad File  

Download 3-D Cad File

Specification MSWord

Specification PDF

Home  •   Products  •  Specifications  •  Submittals  •   CAD Details  •   Test Data  •   PDF Files
Catalog Index  •   M.S.D.S.  •   Credit App.  •   Links  •   Trades Shows  •   Quotation Request  •   Contact  •   History

© Copyright 2003 Heckmann Building Products Inc.