Mobile Nav Open Mobile Nav Close
151
151

Roll over image to zoom in

Corrugated Stone Pin Anchor (151)

Part Number: 151

Made to Order.

Specify thickness, length, width, pin diameter and length, Location of Pin from center of pin to end and steel type. 1/2" minimum of steel between end of anchor and start of hole is recommended.

Available Thickness: 3/16", 1/8", 12 gauge, 14 gauge, 16 gauge

Pin Diameters: 1/4", 3/8", 1/2", 5/8"

Available in Type 304 and Type 316 Stainless Steel

Pins are available loose or welded in place.

Materials/Finishes

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request)

151 Corrugated Stone Pin Anchor

Specify Location of Pin from center of pin to end. 1/2" minimum of steel between end of anchor and start of hole is recommended. 

Pins are available loose or welded in place. 

Note: $400 minimum total per order

Material Specifications 

Stainless Steel: Sheet metal anchors and ties: ASTM A 167, ASTM A 666, ASTM A 240/A240M AISI Type 304. Wire ties and anchors: ASTM A 580 AISI Type 304 (AISI Type 316 available upon request) 

Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ ft2.)(0.46kg/m2)

Mill Galvanized:  Sheet metal anchors and ties: ASTM A 653 G60 Wire: ASTM A 641 (0.1 oz/ ft2.)

Plain Carbon Steel:  ASTM A1008/A1008M Structural Steel ASTM A36/A36M-08 Wire: ASTM A 82/A82M Tensile Strengths 80,000 psi Yield Point 70,000 psi 

 

Help from the Experts