HECKMANN BUILDING PRODUCTS INC.
1501 N. 31st Avenue
Melrose Park, IL 60160-2911
800-621-4140 and 708-865-2403
FAX: 708-865-2640

SUBMITTAL SHEET: #150 FLAT PIN ANCHOR

MADE TO ORDER:

Thickness of Strap: 1/4", 3/16", 1/8", 11 gage, 12 gage, & 16 gage.
Diameter of Pin: 1/4", 3/8", 1/2", 5/8"
Strap Width: 1-1/4" minimum recommended.
Length: Specify overall length of strap and overall length of pin.
Available in Stainless Steel, Hotdip Galvanized After Fabrication, Electro Galvanized After Fabrication, Mill galvanized (16ga - 11ga), or Plain Steel.
Specify Location of Pin from center of pin to end. 1/2" minimum of steel beween end of anchor and start of hole is recommended.
Pins are available loose or welded in place.

Heckmann Building Products Materials and Finishes: Stainless Steel: Sheet Metal Anchors and Ties: ASTM A 167 AISI Type 304. Plate and Bent Bar Anchors: ASTM A 666 AISI Type 304. Wire Ties and Anchors: ASTM A 580 AISI Type 304. Hotdip Galvanized: ASTM A 153 Class B-2: (1.50 oz/ft2) (0.46 kg/m2) Mill Galvanized: Sheet Metal Anchors and Ties: ASTM A 653 G60 Wire: ASTM A 641 (0.1 oz/ft2) Plain Steel: Sheet Metal Anchors and Ties: ASTM A 569, ASTM A 366. Plates, Bars, and Shapes: ASTM A 123, ASTM A 36. Wire: ASTM A 82, ASTM A 82-95a. Firewall Anchors: Rolled Strip Zinc Alloy 710. (Firewall alloy 1/8” and 16 gage only)

 Download 2-D Cad File  

Download 3-D Cad File

Specification MSWord

Specification PDF

© Copyright 2003 Heckmann Building Products Inc.