118

HECKMANN BUILDING PRODUCTS INC.
1501 N. 31st Avenue
Melrose Park, IL 60160-2911
800-621-4140 and 708-865-2403
FAX: 708-865-2640

SUBMITTAL SHEET: #118 DOVETAIL STONE PIN ANCHOR

Used for pinning stone to concrete columns that have cast-in-place Standard Dovetail Anchor Slots.

Made to Order:
Thickness: 3/16" maximum Width: 1" minimum.
Length: Specify length as measured from Face Of Concrete to the end of the anchor. Allow a minimum of 1/4"-1/2" of steel between the start of the pin and the end of the anchor.
Hole Location: Specify as distance from end of anchor to center of hole. Hole is 1/16" larger than the diameter of the pin.
Pins: Available in Diameters of 1/4", 3/8", 1/2", and 5/8".
Minimum length of dowels is usually 3".
Pins are available loose or welded in place. Pins furnished loose allow the stone installer to use the anchor as a template for drilling the hole into the stone.

Available in Stainless steel, Hotdip Galvanized After Fabrication, Electro Galvanized After Fabrication, or Mill Galvanized (1/8" only).

Heckmann Building Products Materials and Finishes:

Stainless Steel:
Sheet Metal Anchors and Ties: ASTM A 167 AISI Type 304.
Plate and Bent Bar Anchors: ASTM A 666 AISI Type 304.
Wire Ties and Anchors: ASTM A 580 AISI Type 304.
Hotdip Galvanized:
ASTM A 153 Class B-2: (1.50 oz/ft2) (0.46 kg/m2)
Mill Galvanized:
Sheet Metal Anchors and Ties: ASTM A 653 G60
Wire: ASTM A 641 (0.1 oz/ft2)
Plain Steel:
Sheet Metal Anchors and Ties: ASTM A 569, ASTM A 366.
Plates, Bars, and Shapes: ASTM A 123, ASTM A 36.
Wire: ASTM A 82, ASTM A 82-95a.
Firewall Anchors:
Rolled Strip Zinc Alloy 710.
(Firewall alloy 1/8” and 16 gage only)